Whirlpool NTC Sensor for Refrigerator Thermistor With Clip W10383615
Product Parameter
Use | Temp Control for Washing Machine |
Reset type | Automatic |
Probe material | Stainless Steel |
Max. Operating Temperature | 150°C (dependent on wire rating) |
Min. Operating Temperature | -40°C |
Ohmic Resistance | 2.7K +/-1% to Temp of 25 deg C |
Electric Strength | 1250 VAC/60sec/0.5mA |
Insulation Resistance | 500VDC/60sec/100MW |
Resistance Between Terminals | Less than 100mW |
Extraction force between wire and sensor shell | 5Kgf/60s |
Terminal/Housing type | Customized |
Wire | Customized |
The Effect of refrigerator temperature sensor
The NTC temperature sensor senses the temperature, converts the temperature into an electrical signal and transmits it to the control system of the refrigerator, and the control system automatically controls the work of the compressor according to the monitored temperature, thereby achieving the stability of the refrigerator temperature.
NTC has become the preferred temperature measurement method in temperature measurement circuits in most cases due to its excellent cost performance, various adaptability of packaging forms, and simple use methods. Widely used in household appliances, power industry, communications, military science, aerospace and other fields.
How to Check a Refrigerator Thermistor
To check a refrigerator thermistor to see if it is faulty, do the following:
Disconnect the refrigerator from electric power or turn the circuit breaker off. Unmount the screw holding the temperature control housing to the refrigerator ceiling and drop it down. You will find the thermistor inside the housing. In some models, the thermistor will be behind a small cover on the back wall inside the refrigerator or on the wall.
Inspect the wire connectors on the thermistor to see if they are loose or damaged. Tighten noticeably loose connections and see if the thermistor resumes working. Otherwise, have a technician fix other wiring faults.
But if the connectors are not the problem, check the thermistor’s resistance with a digital multimeter. Uninstall the thermistor from the control housing by disconnecting the wire harness. Next, place the probes of the multimeter on the white wires extending from the thermistor.
You may find the tech sheet taped to the refrigerator’s back or in the compressor compartment. Check it for the thermistor’s resistance range. Replace the thermistor if the resistance reading is off by over 10% of what the tech sheet says is the correct range.
Craft Advantage
We operate additional cleavage for the wire and pipe parts to reduce the flow of epoxy resin along the line and reduce the height of the epoxy. Avoid gaps and breakage bending of wires during assembly.
Cleft area effectively reduce the gap at the bottom of the wire and reduce the immersion of water under long-term conditions.Increase the reliability of the product.
Our product has passed the CQC,UL,TUV certification and so on, has applied for patents accumulatively more than 32 projects and has obtained scientific research departments above the provincial and ministerial level more than 10 projects. Our company has also passed the ISO9001 and ISO14001 system certificated, and national intellectual property system certificated.
Our research and development and production capacity of the company’s mechanical and electronic temperature controllers have ranked in the forefront of the same industry in the country.