Products
-
Refrigerator Spare Parts Defrosting Heater with Thermal Fuse Electronic Element Assembly
Introduction：Refrigerator Defrost Heater
The defrost heater is a heating element located near or around the evaporator coils. When the defrost timer has entered the Auto Defrost cycle, it will send power to the defrost heater, which will generate heat.
Function: refrigerator defrost
MOQ：1000pcs
Supply Capacity: 300,000pcs/month
-
NTC Temperature Sensor with Fuse Assembly for Refrigerator Defrost Thermostat 6615JB2002R
Introduction：Defrosting Thermostat Fuse 6615JB2002R
This Defrost Thermistor with Fuse, also referred to as a Defrost Temperature Sensor or Freezer Controller Assembly, monitors the temperature of the evaporator coil and can also provide thermal cut off protection.
Function: temperature control
MOQ：1000pcs
Supply Capacity: 300,000pcs/month
-
10K 3950 NTC Thermistor Temperature Sensor for Refrigerator DA32-000082001
Introduction：NTC Temperature Sensor DA32-000082001
NTC Thermistors are non-linear resistors, which alter their resistance characteristics with temperature. The resistance of NTC will decrease as the temperature increases. The manner in which the resistance decreases is related to a constant known in the electronics industry as beta, or ß. Beta is measured in °K.
Function: temperature sensor
MOQ：1000pcs
Supply Capacity: 300,000pcs/month
-
NTC Thermistor Chip Temp Sensor for Refrigerator Electronic Thermostat 0060400810
Introduction：NTC Temperature Sensor 0060400810
NTC Thermistors are non-linear resistors, which alter their resistance characteristics with temperature. The resistance of NTC will decrease as the temperature increases. The manner in which the resistance decreases is related to a constant known in the electronics industry as beta, or ß. Beta is measured in °K.
Function: temperature sensor
MOQ：1000pcs
Supply Capacity: 300,000pcs/month
-
Bimetal Thermal Fuse for Refrigerator Bimetal Temperature Fuse Assembly 3006000113
Introduction：Defrosting Thermostat Fuse 3006000113
A thermal fuse is a cutoff which uses a one-time fusible link. Unlike a thermal switch which may automatically reset itself when the temperature drops, the thermal fuse is more like an electrical fuse: a single-use device that cannot be reset and must be replaced when it fails or is triggered. A thermal fuse is used when the overheating is a result of a rare occurrence, such as failure requiring repair (which would also replace the fuse) or replacement at the end of service life.
Function: temperature control
MOQ：1000pcs
Supply Capacity: 300,000pcs/month
-
OEM&ODM Customized Genuine Refrigerator Whirlpool Bimetal Thermal Fuse A2117510000
Introduction：Thermal Fuse
A thermal fuse or thermal cutoff is a safety device which open circuits against overheat. It detects the heat caused by the over-current due to short circuit or component breakdown. Thermal fuses do not reset themselves when the temperature drops like a circuit breaker would. A thermal fuse must be replaced when it fails or is triggered.
Function: cutoff the circuit by detecting overheat.
MOQ：1000pcs
Supply Capacity: 300,000pcs /month
-
HB-2 Bimetallic Thermostat Switch -SPDT Temperature Controller for Home Appliance
Introduction：KSD301 HB-2 Bimetal Thermostat
These snap-action thermostat is used for preventing fire and damages caused by overheating in the circuit of electric & electronic products.
Horizontal and Vertical Terminal Available. Customized Wire Connection and Bracket Type Available.
Function: temperature control
MOQ：1000pcs
Supply Capacity: 300,000pcs/month
-
Adjustable Thermal Cutoff Auto Fuse Waterproof Home Appliance Parts
Introduction：Thermal Fuse
A thermal fuse is a new type of electrical overheating protection element. This kind of element is usually installed in heat-prone electrical appliances. Once the electrical appliance fails and generates heat, when the temperature exceeds the abnormal temperature, the thermal fuse will automatically fuse to cut off the power supply to prevent the electrical appliance from causing a fire.
Function: cutoff the circuit by detecting overheat.
MOQ：1000pcs
Supply Capacity: 300,000pcs /month
-
15A 250V Thermal Cutoff Auto Fuse for Refrigerator Thermal Overload Protection Device PST-3
Introduction：Thermal Fuse
A thermal fuse is a new type of electrical overheating protection element. This kind of element is usually installed in heat-prone electrical appliances. Once the electrical appliance fails and generates heat, when the temperature exceeds the abnormal temperature, the thermal fuse will automatically fuse to cut off the power supply to prevent the electrical appliance from causing a fire.
Function: cutoff the circuit by detecting overheat.
MOQ：1000pcs
Supply Capacity: 300,000pcs /month
-
Thermal Cut off Switch 2A 250V Refrigerator Auto Fuse Home Appliance Parts
Introduction：Thermal Fuse
A thermal fuse is a new type of electrical overheating protection element. This kind of element is usually installed in heat-prone electrical appliances. Once the electrical appliance fails and generates heat, when the temperature exceeds the abnormal temperature, the thermal fuse will automatically fuse to cut off the power supply to prevent the electrical appliance from causing a fire.
Function: cutoff the circuit by detecting overheat.
MOQ：1000pcs
Supply Capacity: 300,000pcs /month
-
Good Performance Defrost Thermistor Sensor with Fuse for Refrigerator Temperature Controller 6615JB2002T
Introduction：Defrosting Thermostat Fuse 6615JB2002T
This Defrost Thermistor with Fuse, also referred to as a Defrost Temperature Sensor or Freezer Controller Assembly, monitors the temperature of the evaporator coil and can also provide thermal cut off protection.
Function: temperature control
MOQ：1000pcs
Supply Capacity: 300,000pcs/month
-
Bimetal Temperature Switch Defrosting Thermostat Customized Home Appliance Parts
Introduction：Defrosting Thermostat Fuse
A defrost thermostat is the temperature-controlling device within the automatic defrost system of a refrigerator. There are three components to the defrost system: a timer, a thermostat, and a heater. When the coils within a refrigerator become too cold, the defrost timer cues the heater to click on and work to melt any excess ice buildup. The function of the thermostat is to prompt the heater to turn off when the coils return to the correct temperature.
Function: temperature control
MOQ：1000pcs
Supply Capacity: 300,000pcs/month