Products
-
Original Factory OEM Refrigerator Fridge Freezer Parts WP10442409 Defrost Thermostat for Temperature Control
Introduction：Defrosting Thermostat Fuse
WP10442409 Refrigerator Defrost Thermostat (Defrost Limiter Thermostat, High Limit Thermostat, Refrigerator Defrost Bi-Metal Thermostat) acts as a safety device to stop the evaporator coil from overheating, by turning off the defrost heater at the end of the defrost cycle.
Function: temperature control
MOQ：1000pcs
Supply Capacity: 300,000pcs/month
-
OEM Appliance Parts #60128-0005503-00 Refrigerator Fridge Freezer Defrost Heater for Evaporator with Stainless Steel Tubes
Introduction：Refrigerator Defrost Heater
Defrost heater is newly designed to solve the problem of bad refrigeration effect caused by difficult defrosting in various freezers and refrigerator cabinets. The defrost heater is made of stainless steel tube.
Function: refrigerator defrost heater
MOQ：1000pcs
Supply Capacity: 300,000pcs/month
-
Factory OEM Bi-Metal Thermostat Temperature Control Switch Refrigerator Parts Defrost Thermostat 104424-11
Introduction：Defrosting Thermostat Fuse
WP104424 Refrigerator Defrost Thermostat (Defrost Limiter Thermostat, High Limit Thermostat, Refrigerator Defrost Bi-Metal Thermostat) acts as a safety device to stop the evaporator coil from overheating, by turning off the defrost heater at the end of the defrost cycle.
Function: temperature control
MOQ：1000pcs
Supply Capacity: 300,000pcs/month
-
CQC Certified NTC Thermistor Refrigerator Defrost Temp Sensor Stainless Steel Shell
Introduction：NTC Temperature Sensor
NTC temperature sensor is an NTC thermistor after the wire welding, encapsulate into a different probe and then use an epoxy seal. The NTC temperature sensor retains all the features of the NTC thermistor. After the optimization of the injection and cooling stages, will be made into a complete product, mass production is a continuous cycle of this processing step produced. Molding cycle according to product size, probe material and product design is different, a complete temperature sensor requires several different parts and processes.
Function: temperature sensor
MOQ：1000pcs
Supply Capacity: 300,000pcs/month
-
NTC Temperature Sensor for Refrigerator Temperature Controlling Defrost Sensor
Introduction：NTC Temperature Sensor
NTC temperature sensor is an NTC thermistor after the wire welding, encapsulate into a different probe and then use an epoxy seal. The NTC temperature sensor retains all the features of the NTC thermistor. After the optimization of the injection and cooling stages, will be made into a complete product, mass production is a continuous cycle of this processing step produced. Molding cycle according to product size, probe material and product design is different, a complete temperature sensor requires several different parts and processes.
Function: temperature sensor
MOQ：1000pcs
Supply Capacity: 300,000pcs/month
-
OEM FBZA-1750-10D Refrigerator Damper Motor for Samsung DA31-00043F BCD-286WNQISS1 290WNRISA1 WNSIWW DC12V W29-15 Door Motor
Introduction：Refrigerator Door Motor
As the core component of refrigerator multi-temperature zone control, the electric damper is mainly composed of stepper motor, transmission mechanism, door panel and door frame. The drive mechanism is connected with the door plate, and the main control board controls the stepper motor by sending pulse signals, and the opening and closing of the electric damper door plate are controlled by the deceleration of the drive mechanism.
Function: The temperature of the cold room or greenhouse is controlled by its switch
MOQ：1000pcs
Supply Capacity: 300,000pcs/month
-
Refrigerator Evaporator Parts 242044020, 242044008 Defrost Heater kit for Frigidaire Refrigerator Electrolux
Introduction：Refrigerator Defrost Heater
Defrost heaters are used to melt the ice formation in refrigeration equipment. They are formed due to defrost water which turns to ice inside a below freezing cold room, collected in trays or on defrost line. For trays, tubular heaters of different designs are installed.
Function: refrigerator defrost
MOQ：1000pcs
Supply Capacity: 300,000pcs/month
-
Genuine OEM Whirlpool Refrigerator Fridge Freezer Evaporator Parts WP67004188 Stainless Steel Tubular Defrost Heater
Introduction：Refrigerator Defrost Heater
Defrost heater is newly designed to solve the problem of bad refrigeration effect caused by difficult defrosting in various freezers and refrigerator cabinets. The defrost heater is made of stainless steel tube.
Function: refrigerator defrost heater
MOQ：1000pcs
Supply Capacity: 300,000pcs/month
-
Refrigerator Genuine New Original Samsung Temperature Sensor DA32-00012D
Introduction：NTC Temperature Sensor
NTC thermistors are resistors with a negative temperature coefficient, which means that the resistance decreases with increasing temperature. NTC stands for “Negative Temperature Coefficient”.
Function: temperature sensor
MOQ：1000pcs
Supply Capacity: 300,000pcs/month
-
Coil Disk Heat Probe NTC Electrical Sensor Cooker Accessories Diode Glass Sealed NTC Thermistor
Introduction：NTC Thermistor
NTC thermistors are mainly used as resistance temperature sensors and current limiting devices. The temperature sensitivity coefficient is approximately five times that of silicon temperature sensors (silicon oxide) and ten times that of resistance temperature detectors (RTDs).
Function: temperature sensor
MOQ：1000pcs
Supply Capacity: 300,000pcs/month
-
High Quality OEM Parts SL5709 Refrigerator Defrost Thermostat with Sealed Construction
Introduction：Defrosting Thermostat Fuse SL5709
A defrost thermostat is the temperature-controlling device within the automatic defrost system of a refrigerator. There are three components to the defrost system: a timer, a thermostat, and a heater. When the coils within a refrigerator become too cold, the defrost timer cues the heater to click on and work to melt any excess ice buildup. The function of the thermostat is to prompt the heater to turn off when the coils return to the correct temperature.
Function: temperature control
MOQ：1000pcs
Supply Capacity: 300,000pcs/month
-
Double U-shaped Heating Tube High-power Water Tank Boiler Electric Heat Pipe Stainless Steel Heating Pipe
Introduction：Stainless Steel Heating Tube
Tubular electric heating element (referred to as electric heat pipe) is a special electrical element that converts electrical energy into heat energy. It is a metal tube as the shell (including stainless steel, copper tube), along the central axial distribution of spiral electrothermal alloy wire (nickel chromium, iron chromium alloy), the void filled with good insulation and thermal conductivity of the magnesium oxide, the two ends of the pipe sealed with silicone, this metal armored electric heating element can heat air, metal mold and various liquids.
Function: heating element
MOQ：1000pcs
Supply Capacity: 300,000pcs/month