OEM/ODM Factory Thermostat Switch For Electric Heater - 125v 5a 10a 15a Bimetal Thermostat Temperature Controller Refrigerator Defrost Thermostat – Sunfull Hanbecthistem
OEM/ODM Factory Thermostat Switch For Electric Heater - 125v 5a 10a 15a Bimetal Thermostat Temperature Controller Refrigerator Defrost Thermostat – Sunfull Hanbecthistem Detail:
Product Parameter
Product Name | 125v 5a 10a 15a Bimetal Thermostat Temperature Controller Refrigerator Defrost Thermostat |
Use | Temperature control/Overheat protection |
Reset type | Automatic |
Base material | Resist heat resin base |
Electrical Rating | 15A / 125VAC, 10A / 240VAC, 7.5A / 250VAC |
Operating Temperature | -20°C~150°C |
Tolerance | +/-5°C for open action(Optional +/-3 C or less) |
Protection class | IP00 |
Contact material | Double Solid Silver |
Dielectric Strength | AC 1500V for 1 minute or AC 1800V for 1 second |
Insulation Resistance | More than 100MΩ at DC 500V by Mega Ohm tester |
Resistance Between Terminals | Less than 50MΩ |
Diameter of bimetal disc | Φ12.8mm(1/2″) |
Approvals | UL/ TUV/ VDE/ CQC |
Terminal type | Customized |
Cover/Bracket | Customized |
Applications
- Rice Cooker – Dishwasher
- Boiler – Washing Machine
- Water Heater – Oven
- Water Dispenser – Dehumidifier
- Coffee maker – Water purifier
- Fan Heater – Bidet
- Sandwich Toaster
- Other Small Appliances
The Advantage of Automatic Reset Thermostat
Feature Advantage
Automatic reset temperature control switch: as the temperature increases or decreases, the internal contacts are automatically opened and closed.
Manual reset temperature control switch: When the temperature rises, the contact will automatically open; when the temperature of the controller cools down, the contact must be reset and closed again by manually pressing the button.
Craft Advantage
One-time action:
Automatic and manual integration.
Testing Process
Test method for action temperature: install the product on the test board, put it in the incubator, first set the temperature at 10°C, when the temperature of the incubator reaches 10°C, keep it for 3 minutes, and then cool down by 1°C every 2 minutes, testing the recovery temperature of the product. At this time, the current through the terminal is below 100mA. When the product is turned on, set the temperature of the incubator at 6 ° C. When the temperature of the incubator reaches 6 ° C, keep it for 3 minutes, and then increase the temperature by 1°C every 2 minutes to test the disconnection temperature of the product.
Product detail pictures:
Related Product Guide:
With reliable good quality system, great standing and perfect consumer support, the series of products and solutions produced by our organization are exported to quite a few countries and regions for OEM/ODM Factory Thermostat Switch For Electric Heater - 125v 5a 10a 15a Bimetal Thermostat Temperature Controller Refrigerator Defrost Thermostat – Sunfull Hanbecthistem , The product will supply to all over the world, such as: Egypt, Rome, Durban, With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we're trying our best to be your good partner.
Our product has passed the CQC,UL,TUV certification and so on, has applied for patents accumulatively more than 32 projects and has obtained scientific research departments above the provincial and ministerial level more than 10 projects. Our company has also passed the ISO9001 and ISO14001 system certificated, and national intellectual property system certificated.
Our research and development and production capacity of the company’s mechanical and electronic temperature controllers have ranked in the forefront of the same industry in the country.
By Lindsay from Czech Republic - 2018.02.08 16:45
Perfect services, quality products and competitive prices, we have work many times, every time is delighted, wish continue to maintain!
By Ophelia from Morocco - 2017.08.21 14:13