OEM/ODM Factory Thermostat Switch For Electric Heater - 125V 15A Bimetal Thermostat Auto Reset Disc Defrost Thermostat Home Appliance Parts – Sunfull Hanbecthistem
OEM/ODM Factory Thermostat Switch For Electric Heater - 125V 15A Bimetal Thermostat Auto Reset Disc Defrost Thermostat Home Appliance Parts – Sunfull Hanbecthistem Detail:
Product Parameter
|
Product Name |
125V 15A Bimetal Thermostat Auto Reset Disc Defrost Thermostat Home Appliance Parts |
|
Temperature setting range (at no load) |
-20°C ~ 180°C |
|
Tolerance |
Indicated temp ±3°C, ±5°C |
|
ON-OFF differential temperature. (General) |
Min 7~10K |
|
Life Cycle |
15A/125V AC 100,000 cycles, 7.5A/250V AC 100,000 cycle |
|
Contact System |
Normally closed / Normally open |
|
Electrical Rating |
15A / 125VAC, 10A / 240VAC, 7 |
|
Diameter of bimetal disc |
Φ12.8mm(1/2″) |
| Terminal type | Customized |
|
Cover/Bracket |
Customized |
Applications
- Automatic coffeemakers
- Water heaters
- Sandwich toasters
- Dishwashers
- Boilers
- Dryers
- Electric heaters
- Washing machines
- Refrigerators
- Microwave ovens
- Water purifiers
- Bidet, etc
The Advantage of Automatic Reset Thermostat
Feature Advantage
Automatic reset temperature control switch: as the temperature increases or decreases, the internal contacts are automatically opened and closed.
Manual reset temperature control switch: When the temperature rises, the contact will automatically open; when the temperature of the controller cools down, the contact must be reset and closed again by manually pressing the button.
Craft Advantage
One-time action:
Automatic and manual integration.
Testing Process
Test method of action temperature: install the product on the test board, put it in the incubator, first set the temperature at -1°C, when the temperature of the incubator reaches – 1°C, keep it for 3 minutes, and then cool down by 1°C every 2 minutes and test the recovery temperature of the single product. At this time, the current through the terminal is below 100mA. When the product is turned on, set the temperature of the incubator at 2°C. When the temperature of the incubator reaches 2 ° C, keep it for 3 minutes, and then increase the temperature by 1°C every 2 minutes to test the disconnection temperature of the product.
Product detail pictures:
Related Product Guide:
All we do is usually connected with our tenet " Consumer initial, Rely on 1st, devoting around the food stuff packaging and environmental safety for OEM/ODM Factory Thermostat Switch For Electric Heater - 125V 15A Bimetal Thermostat Auto Reset Disc Defrost Thermostat Home Appliance Parts – Sunfull Hanbecthistem , The product will supply to all over the world, such as: Bandung, California, Hungary, Our company now has many department, and there have more than 20 employees in our company. We set up sales shop, show room, and product warehouse. In the meantime, we registered our own brand. We've got tightened inspection for quality of product.
Our product has passed the CQC,UL,TUV certification and so on, has applied for patents accumulatively more than 32 projects and has obtained scientific research departments above the provincial and ministerial level more than 10 projects. Our company has also passed the ISO9001 and ISO14001 system certificated, and national intellectual property system certificated.
Our research and development and production capacity of the company’s mechanical and electronic temperature controllers have ranked in the forefront of the same industry in the country.
By Alberta from Australia - 2017.05.02 18:28
The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.
By Frank from Azerbaijan - 2017.06.19 13:51
