OEM Manufacturer Thermostat Switch For Heater - 250V 10A Electronic Element Bimetal Thermostat HB6 for Motor Cushion Pad Heating Thermostat – Sunfull Hanbecthistem
OEM Manufacturer Thermostat Switch For Heater - 250V 10A Electronic Element Bimetal Thermostat HB6 for Motor Cushion Pad Heating Thermostat – Sunfull Hanbecthistem Detail:
Description
| Product Name | 250V 10A Electronic Element Bimetal Thermostat HB6 for Motor Cushion Pad Heating Thermostat |
| Use | Temperature control/Overheat protection |
| Reset type | Automatic |
| Base material | Resist heat resin base |
| Electrical Rating | 15A / 125VAC, 10A / 240VAC, 7.5A / 250VAC |
| Operating Temperature | -35°C~150°C |
| Tolerance | +/-5°C for open action(Optional +/-3 C or less) |
| Protection class | IP00 |
| Contact material | Double Solid Silver |
| Dielectric Strength | AC 1500V for 1 minute or AC 1800V for 1 second |
| Insulation Resistance | More than 100MΩ at DC 500V by Mega Ohm tester |
| Resistance Between Terminals | Less than 50MΩ |
| Diameter of bimetal disc | Φ12.8mm(1/2″) |
| Approvals | UL/ TUV/ VDE/ CQC |
| Terminal type | Customized |
| Cover/Bracket | Customized |
Applications
- White goods- Electric heaters
- Automotive seat heaters- Rice Cooker
- Dish Dryer- Boiler
- Fire Apparatus- Water Heaters
- Oven- Infrared Heater
- Dehumidifier- Coffee Pot
- Water purifiers- Fan Heater
- Bidet- Microwave Range
- Other Small Appliances
The Advantage of Automatic Reset Thermostat
Craft Advantage
One-time action:
Automatic and manual integration.
Feature Advantage
- Automatic reset for convenience
- Compact, but capable of high currents
- Temperature control and overheating protection
- Easy mounting and quick response
- Optional mounting bracket available
- UL and CSA recognized
Testing Process
Test method for action temperature: install the product on the test board, put it in the incubator, first set the temperature at 10°C, when the temperature of the incubator reaches 10°C, keep it for 3 minutes, and then cool down by 1°C every 2 minutes, testing the recovery temperature of the product. At this time, the current through the terminal is below 100mA. When the product is turned on, set the temperature of the incubator at 6 ° C. When the temperature of the incubator reaches 6 ° C, keep it for 3 minutes, and then increase the temperature by 1°C every 2 minutes to test the disconnection temperature of the product.
Product detail pictures:
Related Product Guide:
We're commitment to offer you the aggressive cost ,superb products and solutions top quality, too as fast delivery for OEM Manufacturer Thermostat Switch For Heater - 250V 10A Electronic Element Bimetal Thermostat HB6 for Motor Cushion Pad Heating Thermostat – Sunfull Hanbecthistem , The product will supply to all over the world, such as: Qatar, Plymouth, Naples, Till now, the goods list has been updated regularly and attracted clients from around the globe. Detailed facts is often obtained in our web-site and you'll be served with premium quality consultant service by our after-sale group. They are going to help you get comprehensive acknowledge about our products and make a satisfied negotiation. Company go to to our factory in Brazil is also welcome at any time. Hope to obtain your inquiries for any pleased co-operation.
Our product has passed the CQC,UL,TUV certification and so on, has applied for patents accumulatively more than 32 projects and has obtained scientific research departments above the provincial and ministerial level more than 10 projects. Our company has also passed the ISO9001 and ISO14001 system certificated, and national intellectual property system certificated.
Our research and development and production capacity of the company’s mechanical and electronic temperature controllers have ranked in the forefront of the same industry in the country.
By Steven from Estonia - 2018.04.25 16:46
A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
By Madeline from Ethiopia - 2018.11.11 19:52
