Good Performance Defrost Thermistor Sensor with Fuse for Refrigerator Temperature Controller 6615JB2002T
Product Parameter
Product Name | Good Performance Defrost Thermistor Sensor with Fuse for Refrigerator Temperature Controller 6615JB2002T |
Use | Temperature control/Overheat protection |
Reset type | Automatic |
Base material | resist heat resin base |
Electrical Ratings | 15A / 125VAC, 7.5A / 250VAC |
Operating Temperature | -20°C~150°C |
Tolerance | +/-5 C for open action(Optional +/-3 C or less) |
Protection class | IP00 |
Contact material | Silver |
Dielectric Strength | AC 1500V for 1 minute or AC 1800V for 1 second |
Insulation Resistance | More than 100MW at DC 500V by Mega Ohm tester |
Resistance Between Terminals | Less than 100mW |
Diameter of bimetal disc | 12.8mm(1/2″) |
Approvals | UL/ TUV/ VDE/ CQC |
Terminal type | Customized |
Cover/Bracket | Customized |
Applications
- Automotive seat heaters
- Water heaters
- Electric heaters
- Anti freeze sensors
- Blanket heaters
- Medical applications
- Electrical appliance
- Ice makers
- Defrost heaters
- Refrigerated
- Display cases
Typical characteristics of the thermistor
The NTC resistor is available in ranges from one ohm to 100 megohms. The components can be used from minus 60 to plus 200 degrees Celsius and achieve tolerances of 0.1 to 20 percent. When it comes to selecting a thermistor, various parameters must be taken into account. One of the most important is the nominal resistance. It indicates the resistance value at a given nominal temperature (usually 25 degrees Celsius) and is marked with a capital R and the temperature. For example, R25 for the resistance value at 25 degrees Celsius. The specific behavior at different temperatures is also relevant. This can be specified with tables, formulas or graphics and must absolutely match the desired application. Further characteristic values of the NTC resistors relate to the tolerances as well as certain temperature and voltage limits.
Craft Advantage
Sunfullhanbec thermistor temperature sensor offer excellent reliability in a compact, rugged, cost-effective design. The sensor is also a proven performer for moisture protection and freeze-thaw cycling. Lead wires can be set to any length and color to match your requirements. The plastic shell can be made from PP, PBT, PPS, or most any plastic that you need for your application. The internal thermistor element can be selected to meet any resistance-temperature curve and tolerance.
Our product has passed the CQC,UL,TUV certification and so on, has applied for patents accumulatively more than 32 projects and has obtained scientific research departments above the provincial and ministerial level more than 10 projects. Our company has also passed the ISO9001 and ISO14001 system certificated, and national intellectual property system certificated.
Our research and development and production capacity of the company’s mechanical and electronic temperature controllers have ranked in the forefront of the same industry in the country.