Factory Supply Snap Action Temperature Switch - 250V 10A Electronic Element Bimetal Thermostat HB6 for Motor Cushion Pad Heating Thermostat – Sunfull Hanbecthistem
Factory Supply Snap Action Temperature Switch - 250V 10A Electronic Element Bimetal Thermostat HB6 for Motor Cushion Pad Heating Thermostat – Sunfull Hanbecthistem Detail:
Description
| Product Name | 250V 10A Electronic Element Bimetal Thermostat HB6 for Motor Cushion Pad Heating Thermostat |
| Use | Temperature control/Overheat protection |
| Reset type | Automatic |
| Base material | Resist heat resin base |
| Electrical Rating | 15A / 125VAC, 10A / 240VAC, 7.5A / 250VAC |
| Operating Temperature | -35°C~150°C |
| Tolerance | +/-5°C for open action(Optional +/-3 C or less) |
| Protection class | IP00 |
| Contact material | Double Solid Silver |
| Dielectric Strength | AC 1500V for 1 minute or AC 1800V for 1 second |
| Insulation Resistance | More than 100MΩ at DC 500V by Mega Ohm tester |
| Resistance Between Terminals | Less than 50MΩ |
| Diameter of bimetal disc | Φ12.8mm(1/2″) |
| Approvals | UL/ TUV/ VDE/ CQC |
| Terminal type | Customized |
| Cover/Bracket | Customized |
Applications
- White goods- Electric heaters
- Automotive seat heaters- Rice Cooker
- Dish Dryer- Boiler
- Fire Apparatus- Water Heaters
- Oven- Infrared Heater
- Dehumidifier- Coffee Pot
- Water purifiers- Fan Heater
- Bidet- Microwave Range
- Other Small Appliances
The Advantage of Automatic Reset Thermostat
Craft Advantage
One-time action:
Automatic and manual integration.
Feature Advantage
- Automatic reset for convenience
- Compact, but capable of high currents
- Temperature control and overheating protection
- Easy mounting and quick response
- Optional mounting bracket available
- UL and CSA recognized
Testing Process
Test method for action temperature: install the product on the test board, put it in the incubator, first set the temperature at 10°C, when the temperature of the incubator reaches 10°C, keep it for 3 minutes, and then cool down by 1°C every 2 minutes, testing the recovery temperature of the product. At this time, the current through the terminal is below 100mA. When the product is turned on, set the temperature of the incubator at 6 ° C. When the temperature of the incubator reaches 6 ° C, keep it for 3 minutes, and then increase the temperature by 1°C every 2 minutes to test the disconnection temperature of the product.
Product detail pictures:
Related Product Guide:
To continually enhance the management technique by virtue of your rule of "sincerely, great faith and high-quality are the base of company development", we widely absorb the essence of similar merchandise internationally, and continuously build new merchandise to meet the demands of customers for Factory Supply Snap Action Temperature Switch - 250V 10A Electronic Element Bimetal Thermostat HB6 for Motor Cushion Pad Heating Thermostat – Sunfull Hanbecthistem , The product will supply to all over the world, such as: Turkey, Bolivia, Spain, We have been persisting in the business essence "Quality First, Honoring Contracts and Standing by Reputations, providing customers with satisfying goods and service. " Friends both at home and abroad are warmly welcome to establish everlasting business relations with us.
Our product has passed the CQC,UL,TUV certification and so on, has applied for patents accumulatively more than 32 projects and has obtained scientific research departments above the provincial and ministerial level more than 10 projects. Our company has also passed the ISO9001 and ISO14001 system certificated, and national intellectual property system certificated.
Our research and development and production capacity of the company’s mechanical and electronic temperature controllers have ranked in the forefront of the same industry in the country.
By Elizabeth from Kazakhstan - 2017.10.27 12:12
The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.
By Madge from Durban - 2018.06.28 19:27
